Rockford-Fosgate Punch P1000X5

Rockford-Fosgate Punch P1000X5

Rockford-Fosgate Punch P1000X2

Rockford-Fosgate Punch P1000X2

Rockford-Fosgate Punch P300X1

Rockford-Fosgate Punch P300X1

Rockford-Fosgate Punch P1000X5

Punch 5-Channel Amplifier

$499.99
Availability: In stock
SKU
P1000X5

Features:

  • Punch Series 5-Channel Class AB / BD Car Amplifier
  • Channel 1-4 RMS Power Rating:
    • 4 ohms: 75 watts x 4 chan.
    • 2 ohms: 125 watts x 4 chan.
  • Subwoofer Channel RMS Power Rating:
    • 4 ohms: 150 watts x 1 chan.
    • 2 ohms: 300 watts x 1 chan.
    • 1 ohms: 500 watts x 1 chan.
  • CEA-2006 compliant amplifier
  • Features C.L.E.A.N. Set-up with 10-step set-up procedure
    w/ input/output clip detection and indicator LEDs
  • MOSFET power supply
  • Muted turn on
  • Cast aluminum heatsink
  • 12dB/octave Butterworth crossover
  • Stealth top mounted control panel
  • LED power, thermal, and protect indicators
  • Nickel-plated captive C-clamp terminals
  • Ultra efficient Class BD circuitry to maximize amplifier power efficiency
  • On-board differential inputs eliminates noise picked up by the signal cable
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • High level input capable with Auto Turn-On circuit (RFIF2SW required, sold separately. This amplifier requires up to Three adapters. )
  • MESHA3 reduces MOSFET temperatures, lowers distortion, increases durability, and prolongs the output device life span
  • Built in NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances
  • Cast aluminum convection heatsink with DTM (Dynamic Thermal Management) evenly distributes excess heat across entire amplifier heatsink to efficiently keep the amplifier temperatures low
  • DSM (Discrete Surface Mounted Components) utilize 1% tight-tolerances improving efficiency of the circuit and lowers operating temperature and potential for noise - similar to circuit boards designed by aerospace manufacturers
  • Input sensitivity: 150mV - 12V
  • Selectable crossover modes: LP / AP / HP
  • Variable crossover filter: 50-250Hz
  • Selectable infrasonic filter (Sub): off / 28 Hz
  • On-board Punch EQ with +18dB boost @ 45Hz.
  • Frequency response Front/Rear: 20 - 20,000Hz
  • Frequency response Sub: 20 - 500Hz
  • Total Harmonic Distortion: <1.0%
  • Dimensions: 15-1/16"L x 7-3/4"W x 2-3/8"H
  • 12 AWG speaker wire output terminals

Specifications:

Power Specifications - Full Range Channels:

  • RMS Power @ 4 ohms: 75 watts x 4 channels
  • RMS Power @ 2 ohms: 125 watts x 4 channels

Power Specifications - Subwoofer Channel:

  • RMS Power @ 4 ohms: 150 watts x 1 channels
  • RMS Power @ 2 ohms: 300 watts x 1 channels
  • RMS Power @ 1 ohm: 500 watts x 1 channels

Amplifier Specifications:

  • Amplifier Series: Punch (Rockford Fosgate)
  • Amplifier Class: D
  • Number of Channels: 5
  • Total RMS Power Output: 1000 watts
  • Maximum Input Gauge Size: 4 AWG
  • Minimum Impedance Bridged: 4 ohms
  • THD at Rated RMS Power: <1.00%
  • Speaker Level Inputs: Optional (Requires Accessory Adapter)
  • Preamp Outputs: No
  • Built-in Crossover: Low-Pass (LP), High-Pass (HP)
  • High-Pass Crossover Frequency: 50 - 250 Hz
  • Low-Pass Crossover Frequency: 50 - 250 Hz
  • Subsonic Filter: Switchable Off/28 Hz
  • Bass Boost: 0 - 18 dB
  • Fan Cooled: No
  • Fuse Rating: 150A Fuse Recommended, Not Included
  • Strappable: No
  • CEA-2006 Compliant: Yes
More Information
Manufacturer Rockford-Fosgate
Amplifier Type 5-Channel
Write Your Own Review
You're reviewing:Rockford-Fosgate Punch P1000X5